• Dust Control Package/Bulk Storage Trailer

    Our dust control package is designed for the Wilco™ WST-1600 field bin trailers and is a complete trailer-mounted pneumatic self-cleaning dust control solution. Our design eliminates dust on filed bin trailer applications with minimal maintenance.


    The Wilco dust control package includes a PowerCore® CP Series system with PowerCore filter packs deliver outstanding performance with PM 2.5 (fine particles) emissions below 0.001 grains per cubic foot, per EPA Method 27 EPA Method 5i. Torit® PowerCore CP Series filter packs are efficiency rated MERV 15 per the ASHRAE 52.2-2007 test standard.

    We have designed this solution for easy maintenance. With the no-tool system, just simply lift the filter access door, loosen the captive hardware, and remove the pulse accumulator. Then lift out the filter pack for easy replacement. The catch basin is designed to hold three sacks to allow full trailer loading without emptying catch basin during a single operation.

    We utilize a Dwyer® Series DH3 Digihelic® differential pressure controller, which is preconfigured to clean filters once 4 in. of water column is reached and automatically stop once 2 in. of water column is reached. Alarm (audio and visual) is set to sound at 5 in. of water column to alert operator to stop loading and inspect filters.


    Nominal airflow range (based on clean filters)700 to 2,000 ft³/min
    Filter area189 ft2 through the use of three filter packs
    Compressed air90 to 100 psi
    Operating temperature32 to 130°F
    Voltage12-V system for trailer units
    Solenoids3D2 solenoids; NEMA 4 solenoid enclosure