• Wilco Acid Transport Trailer  

    Our Wilco™ acid transport trailers are currently available with a steel fiber-reinforced polymer (FRP) barrel units with FRP lining or Tnemec 391 lining design. We custom engineer our trailers to fit your operational needs and specifications.

    Description

     

       FRP  5,000 gallon
    Tank(s)  Meets ASME Sec VIII, Div 1  Meets ASME Sec VIII, Div 1
    Shell and heads  Material ⅝ in. FRP   
    Manways  Hawk FRP or Wilco  Clay and Bailey
    Vents  DOT-approved vents for each compartment  DOT-approved vents for each compartment
    Recirculation manifold  3-in. remote control butterfly valves  3-in. penetrations in tank for addition of recirculation manifold
    Discharge manifold  4 in., with acid-resistant hose  4-in. nominal UHMW PE tubing with 4-in. nominal UHMW PE tees
    Discharge valves from unit manifold  4 in., manual valves  4-in. manual valves
    Discharge valves from individual tank compartments  4 in., air actuated butterfly valves at exit for each compartment  4-in. air actuated butterfly valves at exit for each compartment
    Discharge and recirculation manifold  All steel components are lined.  All components are UHMW PE
    Discharge and recirculation manifold ends  4-in. male unions per customer spec  4-in. female unions
    Recirculation line along top  3 in.   
    Catch basin  Located at rear of unit. Used to collect any fluids from hose rack and pipe ends. 5-gallon capacity.  Located at rear of unit. Used to collect any fluids from hose rack and pipe ends. 5-gallon capacity.
    DOT overturn protection  Tombstones  Tombstones
    Trailer  DOT 412MS  DOT 412MS
    Ladder  Located on roadside  Located on roadside
    Walkway  Walkway with fiberglass grating, handrails, and OSHA-approved safety gate  On roadside with fiberglass grating, handrails, and OSHA-approved safety gate
    Hose tray  28-ft fiberglass hose tray with grating and drain  28-ft fiberglass hose tray with grating and drain
    Paint  Epoxy primer coat and polyurethane top coat (customer choice of colors)  Shot blasted with epoxy primer coat and polyurethane top coat (customer choice of colors)
    Placards  DOT placards as required  DOT placards as required
    Controls  Air controls for discharge and recirculation lines, including emergency kill switch located on front driver’s side on trailer  Air controls for discharge, including emergency kill switch located on both sides of trailer

    Specifications

     

       FRP  5,000 gallon
    Volume  5,000 gallons available in two, three, or four compartments  5,000 gallons, two compartments shell
    F&D heads: Material ¼-in. SA-36
    Width  96 in.  98 in.
    Overall length     37.5 ft
    Length, king pin to rear bumper  40 ft 2 in.  34 ft 5 in.
    Suspension  Two axles, 25-kip Neway Air Ride with ABS  Two axles, 25-kip Hutch leaf spring with ABS or Air Ride suspension with ABS
    Tires  Eight 11R 22.5 radial tires on unimount wheels  Four 445/50R22.5 Michelin super single tires with 22.5×14.0 steel wheels
    Landing gear  Holland trailer landing gear with self-leveling foot  Holland trailer landing gear with self-leveling foot
    King pin  2- or 3-in. welded or bolted king pin assembly  2-in. welded king pin assembly
    Fenders  ⅛-in. steel or FRP available  14-gauge steel